Dry Clean Only
Listed sizes refer to the size of each curtain
Sold in pairs, each curtain measuring the size stated. For example in a pair of curtains measuring 46"x54", there will be two curtains each measuring 46" wide and 54" in length.
To calculate the size of curtain you require, the total width of the curtains should be no less than one and a half the width of your window. To achieve a full and luxurious look, we recommend increasing the fullness to double the width of your window.
Before deciding on the length of your curtains, we recommend you fit your track or pole. Before measuring the length, you must decide whether your curtains should fit the sill, below the sill or to the floor. When measuring the length of your curtain we recommend the following should be taken into account:
Sill length: curtains should finish approximately a half inch (1.5cm) above the sill
Below sill length: curtains should finish approximately 4-6" below the sill for the best effect.
Floor Length: curtains should finish approximately a half inch (1.5cm) above the floor.
When using eyelet curtains we recommend you measure from the top of the curtain pole to where you would like the curtains to finish. Also, please ensure there is at least 1.5" to 2" clearance above your curtain pole.
The above allowances will ensure you get the best from your curtains.
Fully readymade curtains with eyelet finish and fully lined
Please note we can only accept returns of ready-made curtains where the packaging is intact and the curtains have not been hung or the header tape pulled.